Performance Specifications
| Test Item | Test Result | Test Standard |
|---|---|---|
| Appearance | Translucent light-yellow pellets | Visual Inspection |
| Surface Resistivity | 10⁶ Ω | ASTM D257 |
| Density | 1.14 g/cm³ | ASTM D792 |
| Melting Point | 185°C | ASTM D3954 |
| Tensile Strength | 28 MPa | ASTM D638 |
| Elongation at Break | 1800% | ASTM D638 |
| Shore Hardness (Shore D) | 33 | ASTM D2240 |
| Recommended Dosage | 10–20% | — |
※ The above data were obtained under specific test conditions and may vary slightly depending on sample variation and environmental factors. Actual application results should be taken as the final reference.
Recommended Processing Conditions
| Item | Recommended Condition |
|---|---|
| Drying Conditions | 100°C, 3–4 hours |
| Processing Temperature | 180–240°C |
Special Note: Processing temperatures below 200°C may result in insufficient melting and affect performance. Temperatures above 260°C may cause thermal degradation and affect product performance.
Reviews
There are no reviews yet.